Use and Care

What You Need

Materials
Cast iron skillet
Sponge or stiff brush
Clean, dry cloth or paper towels
Vegetable oil or shortening
Kosher salt (optional)

Equipment
Stove (optional)

Instructions

1. Clean the skillet immediately after use, while it is still hot or warm. Avoid soaking the pan or leaving it in the sink, or it may rust.

2. Wash the skillet by hand using hot water and a sponge or stiff brush. Avoid using the dishwasher, soap, or steel wool, as these may strip the pan's seasoning.

3. To remove stuck-on food, scrub the pan with a paste of coarse kosher salt and water. Stubborn food residue may also be loosened by boiling water in the pan.

4. Thoroughly towel dry the skillet or dry it on the stove over low heat. 

5. Using a cloth or paper towel, apply a light coat of vegetable oil or melted shortening to the inside of the skillet. Some people also like to oil the outside of the skillet. Buff to remove any excess.

6. Store the skillet in a dry place.

  • Using soap, steel wool, or other abrasives is not the end of the world, but you may need to re-season the skillet. If the skillet is well-seasoned from years of use, a small amount of mild soap may be used without doing much damage – just be sure to rinse it well and oil it after drying.
  • Remove rust using steel wool or by rubbing it with half a raw potato and a sprinkle of baking soda (seriously, it works!). Again, it may be necessary to re-season the pan after cleaning.

  • Founded in 1997, TELEC has built a solid reputation as a leading supplier in the casting industry. With over 20 years of experience, we specialize in providing high-quality industrial cast iron, stainless steel, and aluminum die-cast casting parts for a wide range of industries, including pumps, valves, motors, and construction machinery. Our comprehensive service includes from casting design to mass production, ensuring our clients receive tailored solutions that meet their exact needs.

    Serving over 150 customers globally, TELEC combines advanced casting techniques with an extensive supplier network, allowing us to deliver efficient, cost-effective, and high-performance products. Our dedicated sales & technical team is committed to providing professional support, backed by our strong market presence and decades of expertise. With TELEC, you gain more than just quality products—you gain a trusted strategic partner for all your casting and supply chain needs.

Your Products，Our Solutions！

Why Choose Us

Customized Service

Support customers to co-develop parts, from drawing specifications to finished product.

Supply Chain Integration

Over the past 20 years, we have built up a panel of reliable, competitive suppliers capable of delivering a full range of casting technologies.

Various Molding Lines

We highly focus on technical innovation and industrial upgrade. There are various molding lines, such as Automatic Molding Line, Lost Foam Molding Line, Resin Sand Molding Line, Jarring Molding Machine Line, Floor Molding Line, Lost Wax Molding Line and Lost Foam Aluminum Molding Line.

3D Sand Printing

-Applicable for complex casting structure

-Reduce the risk of casting defects

-Rapidly manufacturing models for testing and validation in the design phase

Quality Assurance

We build the international level testing laboratories, There are many advanced inspection equipments, such as Bridge Type CMM, HX-MIAS, Brinell Hardness Tester, Oxford Spectrometer and so on. In order to meet the quality requirements of customers, we implement full-process monitoring and continuous improvement.

TELEC obtained the TUV ISO 9001:2015 Quality Management System, ensuring rigorous quality management standards throughout our operations.

Sales Distribution

  • Combining technical expertise and high-quality factory partners, our products are highly appreciated in a wide variety of different markets around the world. Our mission is to provide the best service and solutions in every industry and wherever our customers need them.